Category: Plating Systems
The anatomically pre-contoured plate with small plate and screw dimension is indicated for complex intra-articular and extra-articular distal radius fractures.
For full information on indications, contraindications, warnings and precautions please see the product specific IFU and surgical technique DSEM/TRM/0815/0467(1) .
|Variable angle locking||Holes allow up to 15° off-axis screw angulation in all directions in order to address the individual fracture patterns|
|Low profile construct||Bevelled distal edge, rounded plate edges, polished surface and countersunk screws reduce the risk of soft tissue irritation|
|Guiding block||Allows guided drilling and screw insertion in the predefined nominal angle|
|Bendable tabs||If necessary, tabs can be bent in order to suit the individual anatomical conditions of the bone|
|Oblong VA combi-hole||Allows accurate plate positioning on the bone|
|Additional distal screw options||Enable support of radial styloid, lunate facet and DRUJ|
|Kirschner wire holes||Enable preliminary plate fixation and indicate screw orientation when using guiding blocks|