Search DePuy Synthes

search

Products

 

About this product

Division: Trauma
Category: Plating Systems

Plates for radial head rim and for radial head neck address individual fracture patterns of the proximal radius. 

 

Intended Use

For full information on indications, contraindications, warnings and precautions please see the product specific IFU and surgical technique 036.000.681.

 

 

Features & Benefits

 

Features Benefits
Plate features
  • Nine LCP Proximal Radius Plates available to address various fracture patterns of the proximal radius
  • Plates are precontoured for anatomical fit
  • Combi-holes allow fixation with locking screws in the threaded section for angular stability, and cortex screws in the Dynamic Compression Unit (DCU) section for distraction. A fixed-angle construct provides advantages in osteopenic bone or multifragment fractures, where traditional screw purchase is compromised.
Additional features
  • Limited-contact design shaft with 2, 3, and 4 combi-holes
  • The holes in the head of the plate accept 2.4 mm locking screws and 2.0 mm cortex screws
  • The shaft holes accept 2.4 mm locking screws in the threaded portion or 2.7 mm cortex screws and 2.4 mm cortex screws in the distraction portion
  • Plates for radial head rim available in right and left plates with a 5º tilt to match the anatomy of the radial head
  • Plates for radial head neck fit both the left and right side of the proximal radius

Resources

Surgical Technique 036.000.681
 
V0527A
Please refer to the surgical technique guide or package inserts if included for a complete list of indications, contraindications, precautions and warnings. For further information on DePuy Synthes Products, please contact your local DePuy Synthes Representative .
Back To Top