Search DePuy Synthes

search

Trauma

Page: 
1
Results per page:  Show: 
96

Products

LCP™ Posterior Medial Proximal Tibial Plate 3.5
LCP™ Posterior Medial Proximal Tibial Plate 3.5

The LCP™ Posterior Medial Proximal Tibial Plate 3.5 is an implant contoured to fit the posteromedial aspect of the proximal tibia and offer fixed angle screw trajectories that cross a coronal fracture line. Locking screw options are available in three positions proximally. An elongated, slotted combination hole is located in the neck of the plate and as the first shaft hole. Standard combination holes are in the shaft. Six lengths ranging from 69 – 183 mm in length, and available with 1, 2, 4, 5, 8, or 10 shaft holes will be available in stainless steel and in TAN, and are offered sterile and non-sterile.

Distal Radius Sterile Kit
Distal Radius Sterile Kit

The Distal Radius Sterile Kit provides high quality single-use implants and instruments designed to improve the efficiency of your operating theater when performing distal radius surgeries.

The Distal Radius Sterile Core Kit contains the popular Variable Angle LCP®Two- Column Volar Distal Radius Plate 2.4, the worldwide bestseller within the DePuy Synthes distal radius plate portfolio.  

Expert Tibial Nail
Expert Tibial Nail

The Expert Tibial Nail (ETN) is standard in treating tibial fractures with a wide range of indications.

Plate Reduction Wires
Plate Reduction Wires

The plate reduction wires, which are available with small and large stop,  facilitate preliminary plate fixation of volar and dorsal distal radius plates. 

LCP™ Proximal Radius Plates
LCP™ Proximal Radius Plates

Plates for radial head rim and for radial head neck address individual fracture patterns of the proximal radius. 

Variable Angle Locking Hand System
Variable Angle Locking Hand System

Variable Angle Locking Hand System provides an extensive range of basic and specialty plates for fracture repair and deformity correction..

LCP™ Clavicle Hook Plate
LCP™ Clavicle Hook Plate

The LCP™ Clavicle Hook Plate provides a single solution for fixation of both lateral clavicle fractures and acromioclavicular joint injuries.

LCP™ Distal Ulna Plate 2.0
LCP™ Distal Ulna Plate 2.0

The LCP™ Distal Ulna Plate 2.0 is a low profile, anatomically precontoured plate especially designed for the treatment of fractures in the distal ulna.

Locking Calcaneal Plate
Locking Calcaneal Plate

The Locking Calcaneal Plate is part of the Small Fragment Locking Compression Plate (LCP) System.

Small External Fixator
Small External Fixator

The small external fixator is a system for simple or complex configurations. It is light in weight, consists of only a few components, and offers compatibility with mini, medium, and large external fixators. The clamps with a clip-on, self-holding mechanism allow several types of connection and simplify handling.

Cable System
Cable System

The Cable System is primarily a cerclage system that consists of two different-sized cerclage
cables with crimp in three different materials, and new instruments for applying the cable assembly. The cable assemblies are available for stainless steel and titanium implant indications. They are designed for use with the Cerclage Positioning Pins (for LC-DCP and LCP) and Cerclage Eyes (only available for screws with hex recess). The Cable System is fully compatible with all Synthes plates and screws.

VA-LCP™ Elbow Plating System
VA-LCP™ Elbow Plating System

The VA-LCP™ Elbow Plating System signals the start of a new era in the treatment of elbow fractures. The development of the new system is founded upon the established principles of LCP technology, inspired by the success of the first generation anatomically precontoured elbow plates, and focused on improving patient care.

  • Further reduce the risk of soft tissue irritation by taking into account the poor soft tissue coverage of the elbow, thereby improving the plate profile, optimizing the anatomical plate contours and enabling the screw heads to sit flush in the plate hole.
  • Offer simplicity and adaptability. Variable angle locking technology combines the simplicity of the established LCP screw insertion technique with the possibility of adapting screw angulations. Safety is enhanced during screw insertion by offering optimized predefined screw angles while allowing +/-15° off-axis angulation, if needed.
  • Respond to the specifics of proximal ulna fractures by recognizing the particular biomechanical requirements of each fracture type and therefore offering specific implants with optimized shapes and screw configurations.
  • Provide multiple distal humerus plate configurations, including parallel and perpendicular plating, thereby allowing surgeons to choose their preferred solution.
Trochanteric Fixation Nail (TFN)
Trochanteric Fixation Nail (TFN)

The Titanium Trochanteric Fixation Nail (TFN) System permits an intramedullary approach for the fixation of fractures of the femur. The TFN System consists of a series of cannulated nails, cannulated helical blades, cannulated femoral neck screws, cannulated end caps, and locking bolts and screws. All of the implants in the TFN System are made of titanium alloy.
The helical blade provides improved resistance to varus collapse and rotational control of the medial fracture segment compared to single screw fixation (i.e., lag screws). The result is superior life-to-cut-out versus single screw fixation. This is accomplished through the use of the 11.0 mm helical blade. In addition, the use of the 11.0 mm helical blade results in reduced bone removal versus use of a traditional hip screw. These helical blade features are especially advantageous in osteoporotic fracture fixation. However the TFN system also offers a lag screw fixation using an 11.0 mm femoral neck screw.

ASLS™ Angular Stable Locking System
ASLS™ Angular Stable Locking System

The ASLS™ Angular Stable Locking System offers angular stability for screws used in combination with an intramedullary nail.

TFN-ADVANCED™ Proximal Femoral Nailing System (TFNA)
TFN-ADVANCED™ Proximal Femoral Nailing System (TFNA)

The TFN-ADVANCED™ Proximal Femoral Nailing System is designed to advance hip fracture treatment with:

    •    Outcomes-Based Design
    •    Reduced Procedural Complexity
    •    Comprehensive Surgical Options

TFNA is a system designed to solve a wide range of unmet needs for surgeons, OR staff and administrators.

More than five years in the making, this system offers advancement in hip fracture treatment, including outcomes-based design, reduced procedural complexity, and comprehensive surgical options.

It incorporates the best elements of our highly successful global hip nails (TFN, PFNA, and PFNA II), optimized through input from hundreds of surgeons around the world. TFN-ADVANCED™ Proximal Femoral Nailing System truly is a global platform that delivers modern innovation.

LCP™ Pediatric Hip and Condylar Plates
LCP™ Pediatric Hip and Condylar Plates

LCP Pediatric Hip Plates cover treatment options for stable fixation of varus and valgus osteotomies as well as fractures and derotations of the proximal femur.

LCP Pediatric Condylar Plates are specifically designed locking compression plates for osteotomies of the distal femur in children and adolescents. The LCP features incorporated are fixed angle locking screws in the metaphysis and combi-holes for the diaphysis that allow a choice of locked or cortical screws. LCP Pediatric Condylar Plates 3.5 and 5.0 have a universal design for the left and right femur. Osteotomies for correction in every plane can be stabilized with these plates.

The LCP Pediatric Condylar Plate belongs requires the LCP Pediatric Hip Plates instrumentation for its use. 

VA-LCP™ Volar Extra-Articular Distal Radius Plate 2.4
VA-LCP™ Volar Extra-Articular Distal Radius Plate 2.4

The anatomically pre-contoured plates featuring variable angle locking are indicated for fixation of intra- and extra-articular fractures and osteotomies of the distal radius.

VA-LCP™ Proximal Tibial Plate 3.5
VA-LCP™ Proximal Tibial Plate 3.5

The VA-LCP™ Proximal Tibial Plate 3.5 is part of the VA-LCP Periarticular Plating System, which combines variable angle locking screw technology with conventional plating techniques.

LCP™ Medial Proximal Tibial Plates 4.5/5.0
LCP™ Medial Proximal Tibial Plates 4.5/5.0

The LCP™ Medial Proximal Tibial Plates 4.5/5.0 is part of the Periarticular system, which merges locking screw technology with conventional plating techniques.

VA-LCP™ Volar Rim Distal Radius Plate 2.4
VA-LCP™ Volar Rim Distal Radius Plate 2.4

The anatomically pre-contoured plate with small plate and screw dimension is indicated for complex intra-articular and extra-articular distal radius fractures.

Headless Compression Screws 4.5 & 6.5
Headless Compression Screws 4.5 & 6.5

The countersinkable head and ability for controlled compression offered by the HCS 4.5 & 6.5 widen the range of applications in the foot and ankle due to decreased tissue irritation and its use in the close vicinity of joints.

VARIABLE ANGLE LOCKING CALCANEAL PLATING SYSTEM 2.7
VARIABLE ANGLE LOCKING CALCANEAL PLATING SYSTEM 2.7

This system comprises of a Variable Angle Locking lateral extensile plate 2.7 with a variety of screw hole options to treat a broad array of calcaneal fractures. It also features a minimally-invasive anterolateral plate designed to be inserted through a small incision to help preserve soft tissue on the lateral calcaneal wall. The system features our Variable Angle Locking Technology which provides the ability to adapt screw trajectory to varied patient anatomies and to capture fracture fragments. Instrumentation is also available to assist in fracture reduction.

VA-LCP™ Ankle Trauma System 2.7/3.5
VA-LCP™ Ankle Trauma System 2.7/3.5

This comprehensive ankle plating system addresses the individual surgeon’s preferences, offering low-profile variable angle locking compression plating (VA-LCP) options for the medial, anteromedial, anterolateral and posterolateral aspects of the distal tibia, and the lateral distal fibula.

Bone Reduction Forceps
Bone Reduction Forceps

The bone reduction forceps with a radiolucent J-shaped soft tissue attachment is intended for reduction of distal radius fractures following a volar approach. It aids in pre­cise fracture reposition and allows straight-forward plate fixation.

Large and Medium External Fixator
Large and Medium External Fixator

The modular construction of Large and Medium-size External Fixators makes them highly flexible. A variety of proven forms of assembly can be used to externally stabilize long, tubular bones and pelvic ring fractures as well as arthrodesis and osteotomies. The system is becoming increasingly popular as a minimally-invasive repositioning instrument using the three-rod modular technique. This form of assembly spares soft tissue, is easy to learn and is recommended as a standard by the AO, and makes it much easier to handle and use the External Fixator.

VA Locking Calcaneal Plates 2.7
VA Locking Calcaneal Plates 2.7

DePuy Synthes now offers a comprehensive calcaneal plating system treating all types of calcaneal fractures.

It addresses the individual surgeon’s preferences, offering Lateral Extensile approach plates with the option of tabs or without tabs.
The system also includes new instruments to assist the surgeon in fracture manipulation and reduction as well as a screw targeting clamp for precise targeting of screws from 3.5 to 7.3 mm while maintaining compression. 

PHILOS™ System
PHILOS™ System

PHILOS™ System is an anatomical LCP plating system for proximal humerus fracture fixation. It includes the PHILOS™ Percutaneous Aiming System, for a less invasive transdeltoid approach. 

Expert Retrograde/Antegrade Femoral Nail (R/AFN)
Expert Retrograde/Antegrade Femoral Nail (R/AFN)

Retrograde /Antegrade Femoral Nail.

Slipped Capital Femoral Epiphysis (SCFE) Screw System
Slipped Capital Femoral Epiphysis (SCFE) Screw System

The SCFE Screw System addresses many of the previous and current surgical concerns and follows AO principles:

  1. Stable fixation, with or without compression.
  2. Specific instruments allow percutaneous screw placement and removal, preserving soft tissues and blood supply.
  3. The screw is designed as a shaft screw:
    • for strength, allowing early, active mobilization
    • facilitating implant insertion and removal
  4. The system can be used in conjunction with more complex procedures.
  5. Easy removal allows secondary hip procedures to be performed when necessary.
LCP™ Proximal Femoral Plate
LCP™ Proximal Femoral Plate

The LCP™ Proximal Femoral Plate 4.5/5.0 is part of the LCP Periarticular Plating System, which merges locking screw technology with conventional plating techniques.

The proximal portion of the plate is precontoured for the proximal femur. The two proximal screw holes are designed for 7.3 mm cannulated locking screws and the third locking hole is designed for 5.0 mm cannulated locking screws. The hole for 5.0 mm locking screws is angled so the screw trajectory converges with the proximal 7.3 mm screw. Improved proximal femoral fixation in osteopenic bone is achieved by the screw angulation and the locking interface with the plate. The remaining screw holes in the plate shaft are combi-holes. This provides the surgeon with the flexibility to achieve plate-to-bone apposition as well as axial compression or angular stability.

Expert Tibial Nail PROtect
Expert Tibial Nail PROtect

The Expert nail family offers advanced protection with the Expert Tibial Nail (ETN) with Protect Coating.
The Expert Tibial Nail with PROtect Coating releases high concentrations of antibiotics into the implant’s surroundings to protect your patients from bacterial colonization of the implant. The innovative PROtect Coating allows to be better prepared for even your most high-risk patients.

VA LCP Medial Column Fusion Plates 3.5
VA LCP Medial Column Fusion Plates 3.5

DePuy Synthes now offers a comprehensive 3.5 mm VA LCP plating system designed to stabilize the medial column and restore the arch of the foot, specifically for Charcot foot, severe arthritis or advanced deformities.
Plates are available for applications including dorsome¬dial, medial, medial with talus extension, and plantar.
Plates provide the ability to independently compress each joint using compression forceps, 2.8 mm compression wires, and rods.
Variable Angle Locking Technology allows the surgeon in these complex cases to adapt the screw trajectory to varied patient anatomy’s as well as target specific areas of cortical bone.

LCP™ Broad Curved Plate
LCP™ Broad Curved Plate

The LCP™ Broad Curved Plate has a wide range of indications in the femur and can be ideally combined with other periprosthetic products.

MULTILOC™ Humeral Nailing System
MULTILOC™ Humeral Nailing System

With the MULTILOC™ Humeral Nailing System, DePuy Synthes opens up new opportunities for the treatment of humeral fractures. The modular implant system, consisting of a short and long nail with multiple locking options, covers a wide application range to address simple and complex fractures. The straight nail design and innovative screw concept enable customizable solutions for the individual patient.

System overview

  • Straight nail design for central insertion point:
    • Improved anchorage in strong subchondral bone 1
    • Potentially avoiding insertion through fracture site in typical 3-part fractures 1,2
    • Preservation of hypovascular supraspinatus footprint
  • Innovative screw design
    • Blunt screw tip to reduce the risk of secondary perforation
    • Suture holes to enable reliable attachment of the rotator cuff
    • Countersunk screw heads to reduce the risk of impingement
    • Optional secondary 3.5 mm locking screw (screw-in-screw)
  • Proximal locking holes with polyethylene inlay for angular stability and to reduce instances of screw back-out

 

References

1Stedtfeld HW, Mittlmeier T. "Fixation of Proximal Humeral Fractures with an Intramedullary Nail: Tips and Tricks." Eur J Trauma Emerg Surg 33(2007): 367– 374.
2 Rueger JM, Rücker A, Briem D, Grossterlinden L, Linhart W. "Proximal Humeral Fractures: Nailing." Eur J Trauma Emerg Surg 33(2007): 357– 366.

LCP™ Hook Plate
LCP™ Hook Plate

The LCP™ Hook Plate 3.5 is a simple and flexible plate for optimal treatment of olecranon osteotomies and simple (avulsion) fractures.

Orthopaedic Foot Instruments
Orthopaedic Foot Instruments

The Orthopaedic Foot Instruments have been designed to perform specific procedures on the foot more efficiently. The system consists of three modular sets: Compression / Distraction Device Set, Bone Harvesting Set and Chisel Set.

Titanium Elastic Nail (TEN)
Titanium Elastic Nail (TEN)

TEN are dedicated implants that allow a safe and stable fixation. Sophisticated instruments grant easy and safe handling.

VA-LCP™ Condylar Plate 4.5/5.0
VA-LCP™ Condylar Plate 4.5/5.0

The VA-LCP™ Condylar Plate 4.5/5.0 is part of the VA-LCP Periarticular Plating System which merges variable angle locking screw technology with conventional plating techniques.

The VA-LCP Condylar Plate 4.5/5.0 system has many similarities to standard locking fixation methods, with a few important improvements. Variable angle locking screws provide the ability to create a fixed-angle construct while also allowing the surgeon the freedom to choose the screw trajectory prior to “fixing” the angle of the screw.

A fixed-angle construct provides advantages in osteopenic bone or multifragmentary bridge-plated fractures where screws do not rely on plate-to-bone compression to resist patient load, but function similarly to multiple, small, angled blade plates.

The Variable Angle Locking Compression Plate (VA-LCP) has variable angle combi-holes in the plate shaft that combine a dynamic compression unit (DCU) hole with a variable angle locking screw hole. The variable angle combi-hole provides the flexibility of axial compression and variable angle locking capability throughout the length of the plate shaft. 

VA-LCP™ Anterior Clavicle Plate
VA-LCP™ Anterior Clavicle Plate

The anatomically precontoured fixation system with angular stability for clavicle shaft and lateral clavicle, featuring variable angle locking technology.

LCP™ Locking Compression Plate
LCP™ Locking Compression Plate

LCP™ Locking Compression Plate merge locking screw technology with conventional plating techniques providing angular stability and compression. In case of metaphyseal fractures, comminuted fractures and osteoporotic bone, clinical results can be improved by the angular stable screw/plate connection.

LCP™ Dynamic Hip Screw (DHS) incl. DHS Blade and Locking Trochanter Stabilization Plate (LTSP)
LCP™ Dynamic Hip Screw (DHS) incl. DHS Blade and Locking Trochanter Stabilization Plate (LTSP)

LCP™ Dynamic Hip Screw (DHS) incl. DHS Blade and Locking Trochanter Stabilization Plate (LTSP) is designed for the treatment of proximal femoral fractures, and is especially beneficial for patients with poor quality bone (e.g. osteoporosis).

LCP™ Ulna Osteotomy System 2.7
LCP™ Ulna Osteotomy System 2.7

The LCP™ Ulna Osteotomy System 2.7 consists of a coherent composition of instruments and implants, allowing for precise ulnar shortenings, not dictating the kind of osteotomy cut.

VA-LCP™ Forefoot/Midfoot System 2.4/2.7
VA-LCP™ Forefoot/Midfoot System 2.4/2.7

The system consists of general and procedure-specific plates for osteotomies, arthrodeses and fractures of the foot, variable angle locking and cortex screws, and a compression feature, to aid in reconstructive foot surgery. The implants are available in stainless steel and titanium alloy.

LCP™ Wrist Fusion System
LCP™ Wrist Fusion System

The LCP™ Wrist Fusion System consists of different anatomical precontoured plates for the treatment of total wrist arthrodeses.  

Elbow Hinge Fixator
Elbow Hinge Fixator

As a component of the AO family of external fixators, the joint bridging mobile fixator enables a high degree of flexibility thanks to its modular frame construction. The free pin placement allows greater adaptation to the particular circumstances of each injury. The Elbow Hinge as the central element is compatible with fixation components of large and medium-size external fixators. This increases the flexibility in selecting a patient-specific, optimum form of therapy. Furthermore, little effort is required to switch from rigid to movable external fixation. The radiolucency of the Elbow Hinge Fixator helps you find the anatomical joint axis and makes it easier to position the mechanical axis of the Elbow Hinge. Patients with external fixators can be reliably examined at later times in magnetic resonance tomograms.

Expert Lateral Femoral Nail (LFN)
Expert Lateral Femoral Nail (LFN)

Expert Lateral Femoral Nail (LFN) offers an optimized anatomical design for improved clinical outcomes.

Expert Hindfoot Arthrodesis Nail
Expert Hindfoot Arthrodesis Nail

Lateral bend of the Expert HAN permits proper hindfoot alignment and improves patient’s gait (3°- 5° valgus). Distal locking options of spiral blade or screws provide better purchase in poor quality bone.

LCP™ Superior Anterior Clavicle Plate
LCP™ Superior Anterior Clavicle Plate

The anatomical LCP™ Superior Anterior Clavicle Plate offers an optimal solution to treat fractures of the lateral clavicle and the clavicle shaft.

Distraction Osteogenesis Ring System (DO)
Distraction Osteogenesis Ring System (DO)

The Distraction Osteogenesis Ring System is for fracture fixation, pseudoarthrosis or non-unions of long bones, limb lengthening by epiphyseal or metaphyseal distraction, correction of bony or soft tissue deformities and correction of segmental bony or soft tissue defects.

Cannulated Pediatric Osteotomy System (CAPOS)
Cannulated Pediatric Osteotomy System (CAPOS)

The Cannulated Pediatric Osteotomy System (CAPOS) combines implants and instruments in one convenient system. This system offers the advantages of the osteotomy angled blade plates and cannulated instrumentation. Osteotomy plates provide ease of reduction and good rotational stability while maintaining bone stock. Cannulated instruments work over a guide wire for precise placement and safety.

Headless Compression Screws 1.5, 2.4, 3.0
Headless Compression Screws 1.5, 2.4, 3.0

The Headless Compression Screws 1.5, 2.4 and 3.0 allow for guided insertion and controlled compression to treat a variety of indications in small bones. 

Olecranon Osteotomy Nail
Olecranon Osteotomy Nail

The Olecranon Osteotomy Nail is an intramedullary fixation device for simple fractures and osteotomies of the olecranon.

LCP™ Periarticular Proximal Humerus Plate
LCP™ Periarticular Proximal Humerus Plate

The anatomic fixation system with anterolateral shaft placement.

VA LCP® MEDIAL COLUMN FUSION PLATING SYSTEM 3.5
VA LCP® MEDIAL COLUMN FUSION PLATING SYSTEM 3.5

This system comprises a range of Variable Angle LCP® anatomic plates 3.5 designed for complex fusion applications, specifically Charcot foot, severe arthritis or advanced deformities. The system features our Variable Angle Locking Technology, which provides the ability to adapt screw trajectory to varied patient anatomies and to target specific areas of cortical bone. Instrumentation is also available to assist in joint compression through the plate.

Rotation Correction Plates 1.5 and 2.0
Rotation Correction Plates 1.5 and 2.0

Dedicated plates for fractures and osteotomies at the metacarpals and phalanges where the exact reposition is difficult or where a rotational error can easily occur.

VA-LCP™ Two-Column Distal Radius Plate
VA-LCP™ Two-Column Distal Radius Plate

The VA-LCP™ Two-Column Distal Radius Plate 2.4 featuring variable angle locking technology is a versatile plate for the treatment of intra- and extra-articular fractures and osteotomies of the distal radius.

TOMOFIX™ System
TOMOFIX™ System

The TOMOFIX™ System provides solutions for correcting and shifting the mechanical axis of the leg.

Expert Adolescent Lateral Femoral Nail (ALFN)
Expert Adolescent Lateral Femoral Nail (ALFN)

ALFN for femur fractures in adolescent and small stature patients has been developed to meet the needs where Titanium Elastic Nails do not provide sufficient stiffness due to the size of the patient and existing intramedullary nails for adults are physically too large.

Low Profile Pelvic System
Low Profile Pelvic System

The Low Profile 3.5 mm Pelvic System features a wide range of redesigned stainless steel plates in a variety of precontoured shapes (straight, curved, J-shaped, symphyseal).

LCP™ Compact Hand
LCP™ Compact Hand

The LCP™ Compact Hand offers a comprehensive plate portfolio in the sizes 1.5, 2.0 and 2.4mm to address the different fracture patterns in the hand.

PFNA Augmentation
PFNA Augmentation

PFNA has improved rotational and angular stability thanks to the PFNA blade as a single head element. The augmentation option is a unique system of controlled cement application through the blade resulting in a greater load bearing surface and significantly increased resistance to cut-out.

VA-Locking Intercarpal Fusion System 2.4
VA-Locking Intercarpal Fusion System 2.4

The VA-Locking Intercarpal Fusion System 2.4 consists of implants especially designed for arthrodesis of the midcarpus (Four Corner Fusion) as well as system specific instruments aiding the surgical procedure.

Locking Attachment Plate
Locking Attachment Plate

The Locking Attachment Plate offers angular stable fixation of periprosthetic femoral fractures and is a less-invasive alternative to cerclage.

OPERACE
OPERACE
  • The OPERACE instrument kit is intended for the removal of implant screws made of titanium, titanium alloys and stainless steel – particularly damaged screws.  
  • Screw removal can be challenging, because of ingrown, jammed or broken screws and a large variety of existing screw recess types. 
  • OPERACE consists of reusable handles and single-use inserts offering 40 different screw driver types (shapes & sizes) and high quality removal instruments (extraction screws, drill bits & reamers).

 

Challenges in Screw Removal

  • Long history in plate & screw osteosynthesis with a constant evolution of technologies.  
  • Key technology changed from simple screws to locking & variable angle locking.  
  • Different approaches in the locking technology itself.  
  • No single standardized screw recess.
  • An increasing number of manufacturers offering different systems.
  • Increasing surgery lead times and cost pressure.

CURRENTLY ONLY AVAILABLE IN EMEA

VA-LCP™ Dorsal Distal Radius Plate 2.4
VA-LCP™ Dorsal Distal Radius Plate 2.4

The low profile VA-LCP™ Dorsal Distal Radius Plate 2.4 featuring variable angle locking are intended for the treatment of distal radius fractures using the double plate technique.

Procedures

Foot & Ankle
Foot & Ankle

Our foot and ankle implants and instruments address a wide range of trauma and deformity treatments. Products include anatomically shaped distal tibial, fibular, calcaneal plates and the Expert Hindfoot Arthrodesis Nail. Specialized orthopaedic foot instruments together with the X-plates and Headless Compression Screws are used in corrective osteotomies and arthrodeses in the forefoot and midfoot.

Knee
Knee

We offera comprehensive range of dedicated implants for distal femur, proximal tibia and tibial shaft fractures in the form of plates, screws and nails; as well as instrumentation to facilitate surgery such as aiming devices. Dedicated solutions for periprosthetic fractures and the correction of deformities around the knee are also available.

Pediatrics
Pediatrics

The growing skeleton and the well-being of children and adolescents are our challenge and passion. We develop dedicated solutions and offers a comprehensive range of products for pediatric trauma and pediatric elective surgery.

Hand & Wrist
Hand & Wrist

We offer a comprehensive range of dedicated Hand and Wrist implants which are used for fracture treatment, correction of deformities and reconstructive surgery of the hand skeleton and the distal radius.

News

06/23/2017

DEPUY SYNTHES LAUNCHES SINGLE USE INSTRUMENT KITS FOR WRIST FRACTURE SURGERY TO ENHANCE OPERATING EFFICIENCY AND ELIMINATE STERILIZATION COSTS
Budapest – 22 June 2017 – DePuy Synthes, part of the Johnson & Johnson Family of Companies, today introduced the Distal Radius Sterile Kit, a pre-sterilized, single-use kit of instruments and implants to treat wrist fractures. The announcement was made to the health care community during the combined congress of the Federation of European Societies for Surgery of the Hand and European Federation of Societies.

05/12/2015

DePuy Synthes shares breadth of Trauma portfolio at ECTES 2015
Amsterdam, NL – 12 May 2015 – DePuy Synthes* showcased its latest trauma solutions designed to enhance patient care whilst delivering clinical and economic value to healthcare professionals today at the 16th European Congress for Trauma and Emergency Surgery, organized in cooperation with the Dutch Trauma Society, held in Amsterdam, The Netherlands.

06/11/2014

NEW DEPUY SYNTHES ADVANTAGE™ PROVIDES SOLUTIONS FOCUSED ON IMPROVING CLINICAL AND ECONOMIC OUTCOMES AND PATIENT SATISFACTION
London, UK – 4th June 2014 – Today DePuy Synthes* introduced DEPUY SYNTHES ADVANTAGE, a suite of provider-focused solutions that are focused on complementing the company’s extensive portfolio of clinically proven products with solutions that assist in driving optimal clinical and economic outcomes while striving to improve patient satisfaction. The company unveiled the package of solutions at the 15th European Federation of National Associations of Orthopaedics and Traumatology (EFORT) congress, a combined programme in partnership with the British Orthopaedic Association, held in London, UK.

10/28/2016

DePuy Synthes Addresses Clinical Demand to Reduce the Incidence of Implant Related Infections with Expert Tibial Nail PROtect
The only intramedullary nail with a resorbable antibiotic coating on the market today. Developed to deliver targeted protection against bacterial colonization.

06/11/2014

DePuy Synthes introduces new solutions that address clinical and economic needs at EFORT 2014
London, UK – 4 June 2014 – DePuy Synthes* showcased its latest orthopaedic solutions that are designed to enhance patient care whilst delivering clinical and economic value to health care professionals today at the 15th European Federation of National Associations of Orthopaedics and Traumatology (EFORT) congress, a combined programme in partnership with the British Orthopaedic Association, held in London, UK.

05/29/2015

NEW DEPUY SYNTHES ADVANTAGE™ PROGRAMS FOCUS ON IMPROVING CLINICAL AND ECONOMIC OUTCOMES eSIMS Inventory Management and Ordering Solution DePuy Synthes Geriatric Fracture Program
PRAGUE, CZ – 29th May 2015 – Today DePuy Synthes* introduced two new solutions designed to improve theatre efficiency and enhance patient treatment pathways for joint, spine and trauma surgeries across the EMEA region. The solutions are featured alongside the company’s extensive portfolio of orthopaedic products and value-added solutions at the 16th European Federation of National Associations of Orthopaedics and Traumatology (EFORT) congress, held in Prague, Czech Republic.

Downloads

Placche LCP per radio distale palmare d’ancoraggio multiplo 2.4 mm Brossura (IT)
Brochure
Placca VA-LCP per clavicola anteriore Tecnica chirurgica (IT)
Surgical Technique
Expert A2FN - Italian (IT)
Surgical Technique
Set Screw for Trochanteric Fixation Nail - Itali (IT)
Surgical Technique
Expert A2FN - Spanish (ES)
Surgical Technique
Placche per tarso LCP ad angolo variabile 2.4/2.7 Tecnica chirurgica (IT)
Surgical Technique
Set Screw for Trochanteric Fixation Nail - Spanish (ES)
Surgical Technique
Expert A2FN - French (FR)
Surgical Technique
392.936 Central Body-to-Angulator Clamp, for No. 392.909
Dismantling
Simplified Universal Nails S.U.N
Surgical Technique
392.923 Reduction Grip, for MEFiSTO®
Dismantling
392.945 Base Plate for T-Assembly, for MEFiSTO®
Dismantling
GFP Patient Education - Osteoporosis Follow-up
Patient Information
Sistema di chiodi omerali MultiLoc. Tecnica chirurgica (IT)
Surgical Technique
Placca VA-LCP per radio distale dorsale 2.4. Tecnica chirurgica (IT)
Surgical Technique
Sistema de tornillos SCFE. Técnica quirúrgica (IT)
Surgical Technique
392.905 Single Pin Clamp for MEFiSTO®
Dismantling
03.130.270 Cutters NGHS
Dismantling
Set Screw for Trochanteric Fixation Nail - French (FR)
Surgical Technique
Set Screw for Trochanteric Fixation Nail - German (DE)
Surgical Technique
Page: 
1
Results per page:  Show: 
96
Back To Top